07-20-2006, 11:06 PM
I need help! Its a very simple problem but I just can figure it out. I have an old Fujitsu Point 510 tablet pc. I am using it to monitor my utility usage at my home. The problem is that the tablet dosn't have any ports except the serial port. Sure there are more ports but they are for the docking station and Fujitsu won't tell me the pinouts so I can use the parallel port mixed in the molex connector. Bla...Bla...Bla... I just want a simple line of Qbasic that can read if the rts line is high or low. Please don't explan to me the function of rts, Im well aware. There is plenty of information on com port programming in qbasic but nothing on just a simple input on the rts line. I have tried setting the serial line to low and high and read it in qbasic. It works but seems very unstable. I tend to get a "data i/o" error. I just want a something simple that can detect and count pulses without external circuitry. Please help!!!!