Posts: 3,616
Threads: 287
Joined: Jan 2003
It's like I'm a kid in a candy store when I'm in there.
Anyway, I bought (just to play around with):
1) One thing labeled "transducer" which I thought was a little loudspeaker but turns out it transduces the other way - must be a microphone.
2) Three light-emitting diodes.
3) One little DC motor
4) One buzzer (I hooked that up to make a little code key system to practice my morse.code).
5) 100 feet of run-of-the-mill high-AWG # wire.
6) One toggle switch
7) One momentary normally closed pushbutton switch.
And that's it. Any of you guys ever go buy stuff like that just to play with?
f only life let you press CTRL-Z.
--------------------------------------
Freebasic is like QB, except it doesn't suck.
Posts: 3,279
Threads: 170
Joined: Nov 2003
I used to toy with electronics and robotics when I was younger but it gets to be an expensive hobby after awhile.
I'd knock on wood, but my desk is particle board.
Posts: 4,307
Threads: 63
Joined: May 2003
I know exactly how you feel. I used to, and still do, make little electronics projects
My most memorable project is a "dark activated switch"
Posts: 1,080
Threads: 87
Joined: Feb 2002
I have quite much salvaged parts from broken things I've disassembled.
I almost never use the things, but that's beside the point, and why
throw away something that's working?
/post]
Posts: 3,522
Threads: 189
Joined: Dec 2003
I have a monitor casing (Yup, you read right, the shell of a monitor) filled with electronics stuff, engines, wires, switches, diods, you name it.
There's even a few circuit boards in there, 5-6 computer mouses (or is it mice?
) some small penumatic thingys, (cables, pump, storage tank (a small one, like about two fists in size) and those things that shoot out if you pump air into them, or retract if you suck it out.. dunno what they're called though... silly) pretty fun stuff you can build using that... my current project is some sor of robotic arm, or something. Best thing you can do when power goes out (provided you have batteries)
Posts: 3,616
Threads: 287
Joined: Jan 2003
It seems you guys are a bit more advanced when it comes to projects than me.
I installed a homemade doorbell buzzer into my room, activated by the toggle switch.
Next time I go to the electronics store, I'm going to stock up on some more effective, "smart" stuff like transistors. Maybe I'll pick up some thicker wire (I used the 100 feet all up for a shortwave radio antenna) and solenoid coils. And more switches.
f only life let you press CTRL-Z.
--------------------------------------
Freebasic is like QB, except it doesn't suck.
Posts: 2,765
Threads: 138
Joined: Nov 2002
I read this in a slashdot comment,
(from memory)
It basically a small little device that is hooked to a 555 timer and a batery. it uses one of those cell thingy (forget the name) so that every 5 minutes that the light is detected as off it beeps. When you turn the light on the look for it it doesn't beep. Hide it in your friends dorm =P
Back by popular demand!
I will byte and nibble you bit by bit until nothing remains but crumbs.
Posts: 3,279
Threads: 170
Joined: Nov 2003
Probably a photoelectric cell.
The 555 is a good general purpose timer circuit but the 7555 is better, even if it does have a slightly higher drain.
I'd knock on wood, but my desk is particle board.
Posts: 1,057
Threads: 156
Joined: Aug 2003
dont spend your moneyat radio shack, expensive.
Posts: 3,616
Threads: 287
Joined: Jan 2003
Instead of that photoelectric cell you mention, couldn't a photosensitive diode be used? I'm just thinking of cheapness.
f only life let you press CTRL-Z.
--------------------------------------
Freebasic is like QB, except it doesn't suck.